NRD-8176

STANDARDS: EN 13286-5, ASTM D4253, ASTM D4254

Relative density relates the dry density of cohesionless soil to the maximum and minimum densities. The degree of compaction
of cohesionless soil can be stated in terms of relative density.

This method, in the EN standard, covers the determination of the maximum dry density and water content of cohesionless materials when compacted using a vibrating table. Materials for which this method is applicable may contain up to 12% by mass fines (<0.063 mm). The maximum particle size of the materials to be tested is 80 mm. This method applies to mixtures to be used in road construction.

The ASTM, also specify that it is used for the determination of the relative density of cohesionless soil for which impact compaction will not produce a well-defined moisture-density relationship curve and where the maximum density of impact method will generally be less than by vibratory method.

Relative Density Test Set Supplied complete with 762x762 mm Vibrating Table (3600 rpm) which adjustable vibration magnitude, 14200 cm³ 0,5 cu.ft. Relative Density Mould Set (Cylinder with lead, cylinder in cast aluminum, disc with handle and upper cylinder) and Relative Density Gauge Set.

Relative Density Test Set Supplied complete with 762x762 mm Vibrating Table (3600 rpm) which adjustable vibration magnitude, 0,1 cu.ft. and 0,5 cu.ft. Relative Density Mould Set (Cylinder with lead, cylinder in cast aluminum, disc with handle and upper cylinder) and Relative Density Gauge Set.

Relative Density Pouring Funnel Set is required for loose placement of 9.5mm and finer granular soils in the Mould Set. The Funnel Set includes two Ø152 x 305 mm metal cylinders, each with funnel and 152 mm long delivery spout attached to one end. Spouts are 25.4 mm and Ø 12.7mm. The pouring devices are mandatory according to ASTM D4253 and should be ordered separately.